CALL US AT 833-365-SOLR

Where are the Wires on a Solar Installation?

Where are the Wires on a Solar Installation?

Where are the Wires on a Solar Installation?

Where are the Wires on a Solar InstallationSolar panels are widely used all over the world today. Solar panels provide people with the energy that they need and help them reduce energy costs. Your energy bill will reduce dramatically and you’ll be able to save a lot of money if you choose to have solar panels installed in your house.

Nowadays, most people have seen solar panels either on a home or set up in an open area on the ground.  A common question that people, who take an interest in solar panels, ask is where do all the wires go, and will the installation affect my roof?

What Wires and Cables are Used in Solar Panels?

It goes without saying that wires and cables are a very important element of any solar energy system.

Wires, as well as cables, are used to connect different components in a solar energy system one to another.

Wires and cables connect a solar panel to the following elements such as:

  • Batteries
  • Charge controller
  • Power inverter

The big question is – what wires, as well as cables, are required to connect a solar energy system to each of these components? Let’s dig into this topic and try to get the answer right now!

The efficiency of a solar power system will depend on the type of wire. There are two main types of solar panel wires, including solar panel wire as well as Photovoltaic wire (known as PV wire).

Electrical wiring used in solar power systems comes with either a single-stranded conductor or a multi-stranded conductor.

In most cases, electrical wiring with a single-stranded conductor is used in solar panels. However, electrical wiring with a multi-stranded conductor would be a better option if a solar energy system is installed in areas with strong winds and areas with continuous vibration conditions. The reality is, electrical wiring with a multi-stranded conductor is more durable and flexible.

The maximum number of amps for solar wire is another important component. This parameter shows the amount of current that can travel through wires. And of course, you need to pay close attention to this parameter when planning solar panel wiring.

Actually, the amount of current that can travel through the wires depends a lot on the thickness of solar panel wires. The thicker solar wires are – the more current can go through them. On the other hand, the thicker solar wires are – the more expensive they are.

It’s a good idea to use thicker wires in solar panels. If a sudden power surge happens, then thinner wires will not be able to cope with it. In this case, a solar power system can be damaged.

Obviously, you should do your best to prevent these kinds of things from happening. Give a preference to thicker wires and larger wires. Keep in mind that the higher amounts of current can go through these types of wires.

The thickness of solar wires can be determined. First and foremost, you have to calculate the total amount of current that all appliances in your house need. This will make it possible to calculate the size of wires that have to be used in a solar energy system.                             

Why It’s So Important to Use the Wires of the Right Size in a Solar Energy System?

It’s incredibly important to use the wires of the right size to connect components in a solar energy system one to another.

When solar wires of the wrong size are used, this may result in the loss of energy and many other problems such as overheating, etc. Using the correct size wires will help you prevent these kinds of things from happening.

But most importantly, you need to take care of wires during a solar installation. You need to make sure that solar panels are installed correctly and wires are kept safely.

365 Solar Energy Will Take of Wires Used in Solar Panels

Solar installations, like many pieces of technology, have seen great advancements in recent years.  365 Solar Energy is able to hide wires by utilizing a piece of equipment known as a soladeck.  The soladeck is a contraption that allows the wiring to enter the inside of the attic while keeping everything on the roof watertight and free from leaks.  The wire is then run through the attic to a spot above the meter.  Once above the meter, the company runs conduit down the side of the home to the inverter.  This allows for the installation to look as aesthetically pleasing as possible.

All of the components used for mounting the solar panels to the roof utilize a flashing based mount.  The mounts slide up the shingles, and the installer then finds the dead center of the rafter; which is what the mount attaches to.

Do you have any concerns about wires used in a solar energy system? At 365 Solar Energy, we are always happy to answer any of your questions about solar panel wires. Contact us to get an initial consultation for FREE today!    Contact Us